Do you have stubborn and difficult to remove bolts to deal with? Do you need to periodically degrease and re-lubricate chains or other moving parts? Do you struggle to start a damp motor?
Save yourself time and trouble, buy Release no.1 penetrating and dewatering fluid now!
What is Release No. 1 penetrating and dewatering fluid?
It is a clever blend of light lubricating oil in a low viscosity carrier solvent that enables rapid penetration of inaccessible areas like stuck threads, lubricating them and reducing the time and effort required to get things moving.
But that's not all! As Release No. 1 spreads quickly over the material, it repels surface moisture. The solvent evaporates leaving a hydrophobic film which prevents further corrosion on steel and other water-sensitive metals/alloys. Its dewatering action can be used to dry the surface of recently cleaned components such as chains prior to re-lubrication.
It has high dielectric properties therefore can be used to displace moisture from vehicle electrical systems and prevent ignition tracking, so you will benefit from a better spark.
In short, it is an essential liquid tool that every maintenance team should have in their armoury.
Who should buy Release No. 1?
It is suitable for use in all mechanical, maintenance and repair applications as a penetrating lubricant, rust and corrosion inhibitor and dewatering fluid. This effective product is excellent for displacing moisture when used for vehicle maintenance and also as a corrosion preventative for long term, dry storage of components, for example:
- small Individual ferrous and non-ferrous items
- assembled parts - ferrous and non-ferrous
- complex assemblies with internal surfaces
- large simple assembled items
- delicate mechanisms
Features, advantages and benefits
- Manufactured from the best quality raw materials so that you benefit from its consistent performance and powerful dewatering properties
- Low viscosity solvent so you benefit from its excellent penetrating power to lubricate seized items
- Leaves an ultra thin anti-corrosion protective film so after drying, treated items are not slippery or difficult to handle
How can I release a seized nut and bolt?
Simply spray on and thoroughly soak the area to be treated and allow Release No. 1 to penetrate for several minutes. Badly seized items may require further applications and more time.
How do I remove water from a component that has just been degreased?
Spray Release No. 1 onto the wet areas and the water will be repelled, Shake the droplets off or leave to dry naturally.
How do I protect ferrous components from rust?
Spray Release No. 1 over the whole surface of the component (or dip it if you prefer). Allow to dry naturally. You can then store components and other items inside knowing they are protected from humidity in the air.
Why delay, order your penetrating oil and dewatering fluid online now or talk to the experts for advice or more information on 01495 308048.