Fast Drying Solvent Cleaner - Microtec 41-80
Microtec 41-80 is a safe industrial fast drying solvent cleaner and degreaser. A highly refined cleaning solvent that will quickly break down and remove all greases, oils, inks, most glues, adhesives, waxes and other residues from all metals, painted metals and even delicate plastic, rubber or moulded surfaces. Our best solvent degreaser is safe fast acting, 100% quick evaporating formula is great where rapid drying time is paramount allowing for surface testing, re-coating or further processing. A safe on non live electrical contact cleaner which is Non-toxic with virtually no odour means you can safely use it in confined spaces too.
View Full Description
Fast Drying Solvent cleaner
Microtec 41-80 is a highly refined safety solvent cleaner & degreaser.
The ideal fast drying safe solvent cleaner and degreaser for a range of specialist industrial applications. It is widely used in aerospace, engineering, transport and manufacturing to degrease and clean metal parts, most plastic surfaces, non-live electrical components and printed circuit boards. It is safe for use in confined spaces as it produces no toxic fumes or odours.
Microtec 41-80 cleaning solvent is perfect for degreasing components using dip tanks, ultrasonic cleaning and manual degreasing.
But the good news is that it is now available in 750ml trigger packs to use as an industrial degreaser spray for engineering on-site cleaning work. Its low viscosity makes it simple to degrease and flush those difficult to reach areas.
You can use Microtec 41-80 industrial degreasing solvent with confidence to remove all greases, oils, flux, inks, glues, tars, adhesives, waxes and most other unwanted residues including sticky labels.
Microtec 41-80 degreaser is a solvent cleaner with 100% evaporation, no residue is left behind. This means it the product of choice for engineering pre-inspection work or pre-coating treatments. Its fast-evaporating formula means that testing or coating can be carried out very soon after degreasing.
Properties, advantages and benefits
- Fast-evaporating non-residual formula - surfaces are ready to use shortly after degreasing
- High flashpoint - safe, user friendly industrial solvent cleaner
- Ecological – replaces hazardous solvents
- Versatile – use in a wide range of applications
- Virtually odour-free - more pleasant to use and easier to manage reducing solvent handling overheads
- Multi-purpose - reducing the number of different products you need to buy saving money on admin and storage
Microtec 41-80 can safely be used on many different surfaces and metal components. It's ideal for degreasing and cleaning the following:
- All metals
- Engineering parts
- Non-live electrical components
- Painted surfaces (including chlorinated rubber)
NOTE: you can use Microtec 41- 80 solvent cleaner on non-live electronic parts and components or as a pre-treatment cleaner where subsequent coatings need to be applied later. As it leaves no residue, adherence of the primer and subsequent coatings is not compromised.
Directions for use
Apply Microtec 41-80 to the surface using a brush or spray. Parts may be immersed in dip tank or ultrasonic bath.
Allow to evaporate or blow-dry with air for even faster results.
Wear safety goggles and gloves.
Use in a well ventilated area.
Do not smoke or use near naked flames.
Dilution rates - Not applicable
Buy your Microtec 41-80 degreaser online now or contact our expert team on 01495 308 048 for further advice on the right solvent for your application.