Ultrasonic Cleaning Fluid
UltraMax OPT is Heavy Duty Ultrasonic Cleaning Solution and Industrial Degreaser used for the most difficult jobs associated with the cleaning and degreasing of heavily soiled parts and components to remove residues such as hardened carbon, dyes, wax and greasy deposits. It is highly suitable for use in ultrasonic cleaning tanks.
What Can I Use Ultrasonic Cleaning Fluid For?
UltraMax OPT is used in engineering processes for the safe removal of heavy soiling, including oil and greasy residues, inks and dyes, wax, flux and metal working residues that can be found in drilling, grinding, polishing and lapping residue processes.
It is also used in food manufacturing outlets for the fast removal of baked on carbon, food stuff and fatty residues.
As an ultrasonic cleaning solution, industrial cleaning supplies it is perfect for cleaning glass, ceramics, manufactured parts and components. It has a low foam formula and one of the most frequently used degreasers from our industrial cleaning supplies range.
Where Can I Use UltraMax OPT Ultrasonic Cleaning Solution?
UltraMax OPT Ultrasonic Cleaning Solution contains special anti-corrosion prevention ingredients, making it safe to use on most metals, component parts, spray wash systems and ultrasonic cleaning processes to clean away unwanted build up and residues including most pre-applied protective coatings from mild steels, stainless steel, most plastics, nylons.
It will remove metal working compound residues, oil and light storage wax, protective coating residues that are found in aerospace, shipping, industrial manufacturing, and transport industries.
- Highly concentrated with built in corrosion protection
- Low foam effective formula
- Fast acting ingredients for thorough cleaning
- Removes a multitude of heavy deposits
Application For Use In An Ultrasonic Cleaning Bath
Dilute the ultrasonic cleaning Fluid in the ultrasonic bath 2-8% or 2 parts solution to and leave to work between 2 to 8 minute cycles. If using a heated tank, temperatures over 55 °C is optimal.
Do not allow to dry-on component surface, to avoid this the wash cycle must be followed immediately by a freshwater rinse.
- Lighter cleaning tasks - Dilute 100 parts water
- Medium cleaning tasks - Dilute 50 parts water
- Heavy duty cleaning tasks - Dilute 20 parts water
Application For Spray Washer Parts
Dilute in the ultrasonic bath 1-2% or 1 part solution to and leave to work between 2-to-8-minute cycles. Use heated at temperatures of between 60-80°C.
Note: Do not use on aluminium, galvanized steel, magnesium zinc or their alloys. Always check by carrying out sample test first.
At APT we stock a wide range of industrial cleaning supplies to include, ultrasonic cleaning fluids that suit a multitude of applications; one of our popular ultrasonic cleaning solutions is: www.aptcommercialchemicals.co.uk/ultrasonic-aluminium-cleaner-and-degreaser-ultramax-met
For expert advice on the best ultrasonic cleaner solution for your needs call or email our team of specialists. We have 30 years of experience and have dealt with some of the largest organisations in the UK and Europe.
