Heavy Duty Industrial Degreaser
Sodakleen industrial caustic based degreaser is the best degreaser and cleaner for all heavily contaminated plant parts and equipment we designed this industrial degreaser specifically for metal surface cleaning, processing and heavy-load degreasing tasks found in industrial processing and engineering sectors. It has a highly concentrated formula designed for manual and automated cleaning and degreasing systems. High impact and low-foaming abilities enhances cleaning performance as it retards the formation of air pockets in circulation systems when degreasing small intricate parts and components.
This degreaser quickly penetrates to emulsify unwanted surface contaminants of grease, oils and other unwanted tough to remove residues, ferrous metals and stainless steel surfaces. Sodakleen can be used to safely clean and degrease metal and plastic, nylon, ceramic component parts, filters, and sheet metal surfaces. Sodakleen is part of the highly concentrated range of industrial degreaser fluids and is very cost effective in use, quickly breaking down and removing unwanted surface build up and heavy soiling in commercial cleaning and degreaser processing.
The best way to degrease or remove tough baked carbon deposits from commercial components and equipment parts.
Use for manual deep cleaning, dip soak tank degreasing, as an ultrasonic bath cleaning fluid, tunnel washing, and spray washer fluid and parts washer cleaner.
Sodakleen is a highly concentrated safe degreaser that contains metal corrosion inhibition systems, combined with low-foaming properties for maximum oil, grease and carbon removal without the need for heavy manual work. Our caustic formula is without doubt one of the best industrial degreaser and cleaner solutions for industrial cleaning operations.
Used by our own specialist site service teams and supplied to many industrial cleaning contractors for deep cleaning projects.
- Use to quickly decarbonise most metal surfaces, equipment and utensils
- Removing heavy baked carbonised deposits or unwanted food stuffs, grease, fats from food processing units
- Effective for pre-treating metal ready for new applied coatings
Advantages And Benefits
- A safe, aqueous degreaser and de carboniser
- Fast-working concentrated formulation saves you time and money
- Versatility - many uses in the industrial, engineering, food processing industry
- Use in automated or Part washer cleaner fluid systems
- Low foaming - ensures maximum cleaning and degreasing action
- Power - Sodaklean removes the toughest carbon and oil deposits
- Environmentally friendly and rapidly biodegradable degreaser formula
- Highly effective on ferrous metal with built in corrosion inhibition systems
Sodakleen is the best suitable degreaser and decarboniser for industrial food processing, engineering, re manufacturing, road and rail transport sectors removing all tenacious grease.
How To Clean And Degrease Metal Surfaces
Dilute Sodakleen with the required amount of water hot or cold usually around 50 - 100 parts water for your cleaning or degreasing process allow to work for between 5 - 20 minute contact and cycles times depending on task.
For manual cleaning and degreasing, apply to surface and agitate where required and rinse thoroughly with clean water to remove all residues.
Can be used either cold or hot up to 70°C for optimum cleaning and decarbonising of surfaces.
Typical Dilutions Rates For Automated Systems
For automated degreasing systems, service components', metals and parts cleaning and CIP cleaning:
Dilute Sodaklean to the required amount usually around 50 parts water for your cleaning or degreasing process.
Use cold or hot up to 70°C for optimum cleaning allow to work for between 5 - 25 minute cycles.
Rinse thoroughly with clean water
For pressure washing and steam cleaning of heavy plant and equipment
Apply as low pressure washer detergent to the surface, agitate if required and wash off (use correct PPE).
Remove carbonised deposits as above for engine parts, fat fryer and food processing cleaning.
Use as an ultrasonic tank cleaner up to 60 part water for most industrial cleaning and degreasing operations to achieve maximum results run cycles between 3 and 8 minutes.
Note: Do not allow Sodakleen to dry out on surface without rinsing
For more information on how to clean or degrease any hard surface, industrial cleaning processes and methods please call one of our specialists who can guide and help you with choosing the right degreaser for your application.
Get In Touch with your questions or to call us. #heavydutydegreaser
Maybe the job is too big or complicated for your internal staff or contractors, why not give our sister commercial cleaning contractors a call or visit: www.apt-icc.co.uk/commercial-cleaning to see how we can help you with your next industrial deep cleaning project