Sodakleen industrial degreaser is the best degreaser and cleaner for all heavily contaminated plant parts and equipment. We designed this heavy duty degreaser specifically for metal surface cleaning, processing and heavy-load degreasing tasks found in the industrial processing and engineering sectors.
It has a highly concentrated formula designed for manual and automated cleaning and degreasing systems. High impact and low-foaming properties enhance cleaning performance as it retards the formation of air pockets in circulation systems when degreasing small intricate parts and components.
This degreaser quickly penetrates to emulsify unwanted surface contaminants of grease, oils and other tough to remove residues from ferrous metals and stainless steel.
Sodaklean can be used to safely clean and degrease:
• Ceramic component parts
Heavy Duty Degreaser
Sodakleen industrial degreaser is part of the APT PowerMax highly concentrated range of powerful degreaser and is therefore very cost effective in use, quickly breaking down and removing unwanted surface build up and heavy soiling in commercial cleaning and degreaser processing.
The use of a heavy duty degreaser is best way to degrease or remove tough baked carbon deposits from commercial components' and equipment parts.
You can use it for manual deep cleaning, dip soak tank degreasing, as an ultrasonic bath cleaning fluid, tunnel washing, and spray washer fluid and parts washer cleaner.
Sodakleen contains metal corrosion inhibition systems, which, combined with its low-foaming properties, gives maximum oil, grease and carbon removal without the need for heavy manual work.
You will find that this caustic formula is without doubt one of the best industrial degreaser and cleaner solutions for industrial cleaning operations. It is used by our own specialist site service teams and supplied to many industrial cleaning contractors for deep cleaning projects.
What is the best Degreaser?
• A safe, aqueous degreaser and de-carboniser
• Fast-working concentrated formulation saves you time and money
• Versatility – use in industrial, engineering, food processing industries
• Use in automated or parts washer cleaner fluid systems
• Low foaming - ensures maximum cleaning and degreasing action
• Powerful – removes the toughest carbon and oil deposits
• Environmentally friendly and rapidly biodegradable degreaser formula
• Highly effective on ferrous metal with built in corrosion inhibition systems
Sodakleen is the best degreaser and decarboniser for industrial food processing, engineering, re-manufacturing, road and rail transport sectors for removing all tenacious grease based contamination. quickly decarbonise most metal surfaces, equipment and utensils:
- Removes heavy baked carbonised deposits
- Removes food residue, grease and fats from food processing units
- Effective for pre-treating metal ready for new applied coatings
How to clean and degrease metal surfaces
Dilute Sodakleen heavy duty degreaser with the required amount of water, hot or cold, usually around 50-100 parts water for your cleaning or degreasing process. Allow to work for between 5 -20 minute contact and cycle times depending on the task.
For manual cleaning and degreasing apply to surface and agitate where required then rinse thoroughly with clean water to remove all residues.
Can be used either cold or hot up to 70oc for optimum cleaning and decarbonising of surfaces.
Typical Dilution rates for automated systems:
For automated degreasing systems, service components, metals and parts cleaning; CIP cleaning: Dilute Sodakleen to the required degree, with upto 50 parts water for your cleaning or degreasing process. Rinse thoroughly with clean water.
For pressure washing and steam cleaning of heavy plant and equipment apply as low pressure washer detergent to the surface, agitate if required and wash off (use correct ppe).
Decarbonising: Remove carbonised deposits as above for engine parts, fat fryer and food processing cleaning.
Use as an ultrasonic tank cleaner diluted with up to 60 parts water for most industrial cleaning and degreasing operations. To achieve maximum results, run cycles between 3 and 8 minutes.
Note: do not allow Sodaklean to dry out on surface without rinsing. Caustic based.
For more information on how to clean or degrease any hard surface, industrial cleaning processes and methods please call one of our specialists who can guide and help you with choosing the right degreaser for your application - 01495 308048 #heavydutydegreaser
If your job is too big or complicated for your internal staff or contractors, why not give our sister commercial cleaning contractors a call or visit: www.apt-icc.co.uk/Commercial-Cleaning to see how we can help you with your next industrial deep cleaning project.