Fast Drying Solvent Cleaner - Microtec 41-80 - 2 x 5 Litres
Fast evaporating solvent cleaner and degreaser fluid. Used to remove all greases, oils, inks, glues, adhesives, waxes and sticky residues. A 100% evaporating formula where quick drying time is paramount. Ideal for switch gear and component cleaning. Non-toxic with virtually no odour.
Industrial Solvent Cleaner
Microtec 4180 is a highly refined safety solvent cleaner, degreaser
Circuit board cleaner
The ideal fast drying safe solvent cleaner and degreaser for a wide range of specialist industrial applications. Used in aerospace, engineering, transport and manufacturing to degrease and clean - all metal parts, most plastic, non-live electrical components and boards. Safe for use in confined spaces with no toxic fumes or odours.
Industrial degreaser fluid
Microtec solvent cleaner is perfect for degreasing components in dip tanks, ultrasonic cleaning and manual degreasing.
Now also available in 750 ml trigger packs for engineering on site cleaning work . Its great to flush and degrease difficult to reach areas
You can use Microtec degreasing solvent with confidence to remove all greases, oils, flux, inks, glues, tars, adhesives, waxes and most other unwanted residues including sticky labels.
Fast drying solvent cleaner
A non-residual cleaner which evaporates 100% making it the product of choice for engineering pre-inspection work ,switch gear cleaning or pre-coating treatments.
This versatile degreaser spray replaces many hazardous solvents.
Advantages and benefits
· Fast-evaporating none-residual formula
· A safe, user friendly solvent cleaner
· Ecological – replaces hazardous solvents
· Versatile – use in a wide range of applications
Microtec 41-80 can be safely used on many different surfaces and metal components found in the engineering, aerospace and electronics industries. It's ideal for degreasing and cleaning the following:
Ultrasonic Bath Cleaning Solvent
Ideal for removing all tenacious grease up parts ,flux adhesives and tar ,bitumen residues ,use Kagez 703 ultrasonic cleaner and degreaser use cold to clean
· All metals
· Engineering parts
Non live electrical components
· Painted surfaces (including chlorinated rubber)
NOTE: you can use Microtec solvent cleaner non-live electronic parts and components – or as a pre-treatment cleaner where subsequent coatings need to be applied later.
· Virtually odours-free
· High flash point
EMAIL : email@example.com or call 01495 308 048.