Acid Brick Cleaner - Extreme Wash 80

Extreme Wash 80 - Extra strength, industrial brick cleaner, rust remover and acid descaler. A unique blend of powerful hydrochloric acids and surfactants, allowing deeper penetration and increased action to ensure rapid removal. It is by far the best industrial limescale remover available on the market. Used in the building trade throughout the UK to rapidly remove stains and mortar splashes from brickwork, masonry and ceramics.
View Full Description
Share

Acid Brick Cleaner

Extreme Wash 80 is a concentrated, strong brick cleaner and industrial descaler used to remove cement and motar splashes as well as cleaning grime from many hard surfaces. Its unique blend of acid and powerful surfactants give this product a deep penetrating action providing you with fast and effective cleaning of concrete slabs, bricks, paving stones and other similar hard surfaces. 

Over time your brick, masonry and ceramic surfaces can start to look jaded.  Searching the internet will reveal many different methods and recommendations to restore yours to its pristine condition - finding the one that works in your case can be hit and miss. If only you could cut out the guesswork, trial and error you could save yourself so much time...

... APT have done that for you with their product Extreme Wash 80 Acid Based Brick Cleaner - no guessing, no trial and error just a product that works!

Not just a brick cleaner

You will also find that Extreme Wash 80 is the best descaler for removing mortar stains, limescale deposits and light rusting from metals, plastics, glass, and tiled ceramic surfaces.

And if you are in the building trade, Extreme Wash 80 brick cleaner may also be used for the removal of concrete and mortar residues from your building equipment, concrete mixers and tools.

Directions to use Acid Brick Cleaner

For light soiling and stain removal from hard surfaces

Use Extreme Wash 80 pre-diluted in an appropriate applicator.  Apply to the surface to be cleaned, using a stiff brush where necessary for stubborn or heavy deposits. When the desired result has been achieved, rinse the surface thoroughly with clean water.

To remove limescale, mortar staining and rust marks from components

Place items into pre-diluted Extreme Wash 80 in a soak or dip tank. Allow sufficient time for the solution to penetrate and break down the limescale or rust on the components. Rinse, and if required, apply APT rust inhibitor for storage of metal components.

Please contact our technical services experts for advice - 01495 308048

Typical dilutions:

For optimal rust removal and stain cleaning dilute with up to 20 parts of water.

For the best limescale removal dilute with up to 10 parts of water.

For more information on how to choose the most effective brick cleaner for your application email us with your questions on sales@apt-icc.co.uk or call us now on 01495 308048

 

#brick cleaner and acid brick cleaner

Do you use your own teams or use contractors to carry out deep cleaning and maintenance projects? Why not give our industrial and commercial cleaning contractors division a call or visit our web site: www.apt-icc.co.uk/brick-cleaning/

Picture of Acid Brick Cleaner - Extreme Wash 80 - 2 x 5 Ltr
£49.78
£42.99
Acid Brick Cleaner - Extreme Wash 80 - 2 x 5 Ltr
Picture of Acid Brick Cleaner - Extreme Wash 80 - 4 x 5 Litre
£86.00
£72.98
Acid Brick Cleaner - Extreme Wash 80 - 4 x 5 Litre

Acid Brick Cleaner

Extreme Wash 80 is a concentrated, strong brick cleaner and industrial descaler used to remove cement and motar splashes as well as cleaning grime from many hard surfaces. Its unique blend of acid and powerful surfactants give this product a deep penetrating action providing you with fast and effective cleaning of concrete slabs, bricks, paving stones and other similar hard surfaces. 

Over time your brick, masonry and ceramic surfaces can start to look jaded.  Searching the internet will reveal many different methods and recommendations to restore yours to its pristine condition - finding the one that works in your case can be hit and miss. If only you could cut out the guesswork, trial and error you could save yourself so much time...

... APT have done that for you with their product Extreme Wash 80 Acid Based Brick Cleaner - no guessing, no trial and error just a product that works!

Not just a brick cleaner

You will also find that Extreme Wash 80 is the best descaler for removing mortar stains, limescale deposits and light rusting from metals, plastics, glass, and tiled ceramic surfaces.

And if you are in the building trade, Extreme Wash 80 brick cleaner may also be used for the removal of concrete and mortar residues from your building equipment, concrete mixers and tools.

Directions to use Acid Brick Cleaner

For light soiling and stain removal from hard surfaces

Use Extreme Wash 80 pre-diluted in an appropriate applicator.  Apply to the surface to be cleaned, using a stiff brush where necessary for stubborn or heavy deposits. When the desired result has been achieved, rinse the surface thoroughly with clean water.

To remove limescale, mortar staining and rust marks from components

Place items into pre-diluted Extreme Wash 80 in a soak or dip tank. Allow sufficient time for the solution to penetrate and break down the limescale or rust on the components. Rinse, and if required, apply APT rust inhibitor for storage of metal components.

Please contact our technical services experts for advice - 01495 308048

Typical dilutions:

For optimal rust removal and stain cleaning dilute with up to 20 parts of water.

For the best limescale removal dilute with up to 10 parts of water.

For more information on how to choose the most effective brick cleaner for your application email us with your questions on sales@apt-icc.co.uk or call us now on 01495 308048

 

#brick cleaner and acid brick cleaner

Do you use your own teams or use contractors to carry out deep cleaning and maintenance projects? Why not give our industrial and commercial cleaning contractors division a call or visit our web site: www.apt-icc.co.uk/brick-cleaning/

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent

To obtain the MSDS document for this product, please call 01495 308048 or contact us.